Inverters, batteries and PV are quickly chosen for an off-grid system. The AC distribution that ties everything together, however, is often engineered, verified and commissioned as a one-off – again at every site. For off-grid and hybrid systems between roughly 300 and 800 kW, enwitec electronic GmbH, an SMA partner, has therefore developed the CentralConnect 500/800 AC main distribution board. 17 systems have been realised for remote off-grid systems in Asia, and more than 20 systems in total in Europe and Asia.

The problem: every off-grid system becomes a one-off

According to IRENA, more than 666 million people worldwide still lack access to electricity. Where grids are missing or weak, hybrid systems of PV, batteries and generators are taking over: on one Philippine island, the Asian Development Bank (ADB) reports, power used to be available four hours a day from a diesel generator; today supply runs around the clock (not an enwitec project).

For EPCs, planners and operators, the difficulty shifts from the individual component to how components work together:

  • Engineering per project: In the range of roughly 300 to 800 kW, AC distribution is often built as custom switchgear under IEC 61439 – with its own design, verification and documentation for every project.
  • Interfaces: The more inverters, generation, loads and generators work together, the more connections must be coordinated, tested and commissioned.
  • Remote sites: Delivery, assembly and commissioning are costly – all the more reason for a system that can be installed without deep training.
  • Rollout: Anyone building many similar sites does not want to redesign each time.

CentralConnect: one main distribution board for inverters, PV, loads and generator

CentralConnect is an AC main distribution board for off-grid-capable, AC-coupled battery inverters. It is matched to the SMA Sunny Island X and type-tested for it. On its Sunny Island X product page, SMA lists enwitec’s CentralConnect 500/800 – enwitec is an SMA partner – as the Sunny Island X Connection Box for up to 10 or 16 Sunny Island X; according to SMA, the Connection Box is not an SMA product. CentralConnect brings battery inverters, photovoltaics and loads together at one point and is delivered as a pre-assembled switchgear system with CE marking. Depending on the version, it connects the PV system to a generator, to the public grid or to both; the generator can be integrated in the version with ATS (automatic transfer switch), with generator connections up to 1,000 A. The design allows a qualified electrician to install it without deep familiarisation with the system; operation is tailored to the customer.

Inverter connection with aluminium or copper conductors via tunnel terminals.

In practice: where CentralConnect is used

For confidentiality reasons, enwitec does not name customers or give exact locations. The projects show the range of applications.

Power supply for remote islands, Asia – 17 systems (10 × 500 class, 7 × 800 class)

Challenge: The islands are so remote that no public power supply will ever reach them. Supply has to be built entirely on site – commercially, at several sites with a similar task.

Solution: A standardised AC main distribution board in two power classes, matched to the Sunny Island X inverters used.

Why CentralConnect: Planned once, usable at every site · installable by a qualified electrician · commissioning depends on the number of inverters, about one day when fully equipped · flexible connection with aluminium or copper via tunnel terminals · type-tested for the Sunny Island X · generator can be integrated when CentralConnect is used with ATS.

EV charging station, Gran Canaria – 1 × CentralConnect 500

Background: According to Red Eléctrica, the Canary Islands’ power system relies on diesel as its main fuel; in 2025 renewables reached a record share of 20.9 percent there.

Solution: One CentralConnect 500 brings inverters, PV and loads together. Depending on the version, three configurations are possible: PV and generator, PV and public grid, or PV, generator and public grid.

Agricultural straw processing, northern Spain – 1 × CentralConnect 500

Use: One CentralConnect 500 serves as the central distribution for generation, storage and loads, including a straw baler.

Pilot installations in Spain and Germany

Use: Two pilot installations: one in south-eastern Spain (1 × 500 class) and one pilot box in cooperation with SMA in Germany (1 × 800 class).

Takeaways: when a standardised AC main distribution board pays off

  • Several sites with a similar architecture? The same building block can be reused instead of redesigning each switchgear.
  • Power range of 300 to 800 kW? The 500 and 800 classes accept up to 10 and 16 battery inverters of 50 kW respectively.
  • System with the SMA Sunny Island X? CentralConnect is matched to it and type-tested.
  • Little time and few skilled staff on site? A qualified electrician can install the system; commissioning takes about one day when fully equipped, depending on the number of inverters.
  • Generator or grid as a supplement? Both can be connected; the generator in the version with ATS.

EPCs and system integrators can reduce engineering, installation and commissioning effort compared with project-specific redesign. Engineering consultancies get a fixed planning basis of two power classes, three versions and a technical datasheet. Operators benefit from a solution that can be deployed identically across sites.

“Off-grid systems are getting larger and more demanding. Our projects show that wherever several generators, storage units and loads work together, you need one central point where everything comes together – and that does not have to be reinvented for every project.” — Alexander Veit, Head of Development, enwitec electronic GmbH

Discuss your project

Planning a storage, off-grid or hybrid project? Talk to enwitec’s experts about sizing CentralConnect: +49 8725 9664-0 · info@enwitec.eu. The technical datasheet and further information are available on the product page.

Über die enwitec electronic GmbH

enwitec electronic GmbH, part of the greenLink Group, develops connection technology and energy storage solutions for renewable energy. Its portfolio includes generator junction boxes, firefighter switches, AC distribution boards, grid and system protection, grid changeover boxes and battery fuse solutions. enwitec also acts as a full-service provider for grid connection projects: from the design and supply of transformer and handover stations through coordination with the grid operator and the configuration and supply of the plant controller (EZA controller) to support for plant certification, declaration of conformity and protection testing of the stations. Target groups are electrical installers, EPCs, engineering firms and plant operators. More information: www.enwitec.eu

Firmenkontakt und Herausgeber der Meldung:

enwitec electronic GmbH
Scherrwies 2
84329 Wurmannsquick
Telefon: +49 (8725) 9664-0
http://enwitec.eu

Ansprechpartner:
Marcel Rottler
Global Head of Marketing
Telefon: +49 (8725) 9664-0
E-Mail: m.rottler@enwitec.eu
Für die oben stehende Story ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel